Filter
Top Products
413
Practical hints
Flat tire
Mounting the spare wheel
Preparing the vehicle
Prepare the vehicle as described
(
୴ page 412).
Vehicles with Minispare wheel:
̈ Take the wheel wrench, the wheel
bolts, and the jack out of the trunk
(
୴ page 389).
̈ Take the Minispare wheel out of the
trunk (
୴ page 393).
Vehicles with collapsible tire
(CLK 55 AMG only):
̈ Take the collapsible tire, wheel wrench,
wheel bolts, jack, and electric air pump
out of the trunk (
୴ page 390).
Lifting the vehicle
̈ Prevent the vehicle from rolling away
by blocking wheels with wheel chocks
or other sizable objects.
One wheel chock is included with the
vehicle tool kit (
୴ page 389).
When changing wheel on a level surface:
̈ Place the wheel chock in front of and
another sizable object behind the
wheel that is diagonally opposite to the
wheel being changed.
When changing wheel on a hill:
̈ Place the wheel chock and another
sizable object on the downhill side
blocking both wheels of the other axle.
Warning! G
The jack is designed exclusively for jacking
up the vehicle at the jack take-up brackets
built into both sides of the vehicle. To help
avoid personal injury, use the jack only to lift
the vehicle during a wheel change. Never
get beneath the vehicle while it is supported
by the jack. Keep hands and feet away from
the area under the lifted vehicle. Always
firmly set parking brake and block wheels
before raising vehicle with jack.
Do not disengage parking brake while the
vehicle is raised. Be certain that the jack is
always vertical (plumb line) when in use,
especially on hills. Always try to use the jack
on level surface. Make sure the jack arm is
fully seated in the jack take-up bracket. Al-
ways lower the vehicle onto sufficient ca-
pacity jackstands before working under the
vehicle.