Filter
Top Products
256
Controls in detail
Driving systems
1 Set current or higher speed
2 Set current or lower speed
3 Cancel cruise control
4 Resume at last set speed
Setting current speed
̈ Accelerate or decelerate to the desired
speed.
̈ Briefly lift 1 or depress 2 the cruise
control lever.
The current speed is set.
̈ Remove your foot from the accelerator
pedal.
Cruise control is activated.
The selected speed appears in the multi-
function display for approximately five sec-
onds, and the corresponding speedometer
segments from the selected speed to the
vehicle maximum speed are illuminated.
Warning! G
CLK 500:
Cruise control brakes automatically so that
the set speed is not exceeded. The brake
pedal is depressed automatically to do this.
Keep in mind that cruise control is a conve-
nience system designed to assist the driver
during vehicle operation. The driver is and
must always remain responsible for the ve-
hicle’s speed and for safe brake operation.
Keep driver’s foot area clear at all times, in-
cluding the area under the brake pedal. Ob-
jects stored in this area may impair pedal
movement which could interfere with the
braking ability of the cruise control system.
Do not place your foot under the brake pedal
- your foot could become caught.