Filter
Top Products
407
Practical hints
Replacing bulbs
High beam bulb
̈ Turn housing cover 2 counterclock-
wise and remove it.
̈ Turn bulb holder 5 with the bulb coun-
terclockwise and remove it.
̈ Pull the bulb at its socket out of bulb
holder 5.
̈ Insert the new bulb so that its socket
locates in the recess of bulb holder 5
and is level to it.
̈ Reinsert bulb holder 5 with the bulb in
the lamp and turn clockwise.
̈ Align housing cover 2 and turn it
clockwise.
Front turn signal lamp bulb
̈ Turn bulb socket 3 counterclockwise
and remove it.
̈ Press gently onto the bulb and turn
counterclockwise out of bulb
socket 3.
̈ Press the new bulb gently into bulb
socket 3 and turn clockwise until it
engages.
̈ Place bulb socket 3 back into the
lamp and turn it clockwise.
Parking and standing lamp bulb
̈ Turn housing cover 2 counterclock-
wise and remove it.
̈ Pull out bulb socket 6 with the bulb.
̈ Pull the bulb out of the bulb socket 6.
̈ Press the new bulb into bulb socket 6.
̈ Press bulb socket 6 back into the
lamp.
̈ Align housing cover 2 and turn it
clockwise.