Filter
Top Products
51
Getting started
Driving
̈ Turn exterior lamp switch to
position B.
The low beam headlamp indicator
lamp B in the instrument cluster
comes on (
୴ page 24).
High beam
The combination switch is located on the
left of the steering column.
Combination switch
1 High beam
2 High beam flasher
̈ Push combination switch in direction of
arrow 1.
The high beam headlamp indicator
lamp A in the instrument cluster
comes on (
୴ page 24).
Turn signals
The combination switch is located on the
left of the steering column.
Combination switch
1 Turn signals, right
2 Turn signals, left
̈ Press combination switch in direction
of arrow 1 or 2.
The corresponding turn signal indicator
lamp L or K in the instrument
cluster flashes (
୴ page 24).
The combination switch resets automati-
cally after major steering wheel move-
ments.
i
To signal minor directional changes
such as changing lanes, press combi-
nation switch only to the point of resis-
tance and release. The corresponding
turn signals will flash three times.