Filter
Top Products
117
Controls in detail
Seats
Head restraint tilt
Two different head restraint angle
positions are available.
̈ Press the release button (୴ page 116)
and tilt the head restraint to the
desired position.
Removing and installing rear seats
head restraints
1 Release button
Removing rear seat head restraints
̈ Fold back head restraint (୴ page 116).
̈ Pull head restraint to its highest
position.
̈ Push release button 1 and pull out
head restraint.
Installing rear head restraints
̈ Insert head restraint and push it down
until it engages.
̈ Push release button 1 and adjust
head restraint to desired position.
i
Adjust the head restraint in such a way
that it is as close to the head as
possible.
Warning! G
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint so that the center of
the head restraint supports the back of the
head at eye level. This will reduce the poten-
tial for injury to the head and neck in the
event of an accident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an
accident.
Do not interchange head restraints from
front and rear seat.