Filter
Top Products
115
Controls in detail
Seats
Rear seat head restraints Head restraint height
1 Release button
Raising:
̈ Manually adjust the height of the head
restraint by pulling it upward.
If the head restraint is fully retracted,
push release button 1 and pull the
head restraint out.
Lowering:
̈ To lower the head restraint, push
release button 1 and push down on
the head restraint.
Warning! G
For safety reasons, always drive with the
rear head restraints in the raised position
when the rear seats are occupied.
Keep the area around head restraints clear
of articles (e.g. clothing) to not obstruct the
folding operation of the head restraints.
i
Adjust the head restraint in such a way
that it is as close to the head as
possible.
Warning! G
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint so that the center of
the head restraint supports the back of the
head at eye level. This will reduce the poten-
tial for injury to the head and neck in the
event of an accident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are
intended to help reduce injuries during an
accident.