Filter
Top Products
71
Safety and Security
Occupant safety
Blocking rear door window operation
The override switch is located in the driv-
er’s door.
1 Override switch
Activating override switch
̈ Slide override switch 1 to the right.
A dot becomes visible. The functions in
the rear are disabled.
i
With a child seat installed in the left
rear seat, the seat belt for the center
seat occupied by a passenger must op-
erate freely.
Non-LATCH type child seats may also
be used and can be installed using the
vehicle’s seat belt system. Install child
seat according to the manufacturer’s
instructions.
Warning! G
Install child seat according to manufactur-
er’s instructions.
The child seat must be firmly attached in the
right and left side anchors.
Warning! G
An incorrectly mounted child seat may come
loose during an accident.
Damaged or impact-damaged child seats or
child seat mounting fittings must be re-
placed.
Do not leave children unattended in the ve-
hicle, even if the children are secured in a
child restraint system.
Children too big for child restraint systems
must ride in back seats using regular seat
belts. Position shoulder belt across chest
and shoulder, not face or neck. A booster
seat may be necessary to achieve proper
belt positioning for children from 41 lbs until
they reach a height where a lap/shoulder
belt fits properly without a booster.
i
Operation of the rear windows with the
switches located in the driver’s door is
still possible.