Filter
Top Products
300
Practical hints
Replacing bulbs
Front turn signal lamp
1 Securing screw
2 Turn signal lens
̈ Switch off the lights.
̈ Unscrew securing screws 1.
̈ Remove turn signal lens 2.
3 Bulb
̈ Push bulb 3 into socket, turn counter-
clockwise and remove.
̈ Insert new bulb in socket, push in and
turn clockwise until it clicks in.
̈ Reinstall turn signal lens 2 and screw
in securing screws 1.
Side marker lamp
The following description applies to both
the front and the rear side marker lamps.
Front side marker shown
1 Securing screw
2 Side marker lamp housing
̈ Switch off the lights.
̈ Unscrew securing screws 1.
̈ Remove side marker lamp housing 2.
i
G55AMG:
Remove the protective grille before re-
placing bulbs.
i
Do not overtighten securing screws 1.
Otherwise turn signal lens 2 could be
damaged.