Filter
Top Products
36
Getting started
Adjusting
Seat cushion tilt
̈ Press the switch up or down in the di-
rection of arrow 4 until your upper
legs are lightly supported.
Seat backrest tilt
̈ Press the switch forward or backward
in the direction of arrow 2 until your
arms are slightly angled when holding
the steering wheel.
Seat height
̈ Press the switch up or down in the di-
rection of arrow 5.
Make sure you have sufficient head-
room.
Head restraint height
̈ Press the switch up or down in the di-
rection of arrow 1.
Adjust head restraint to support the back
of the head approximately at eye level.
Head restraint tilt
Manually adjust the angle of the head re-
straint.
̈ Push or pull on the upper edge of the
head restraint cushion.
For more information, see “Seats”
(
୴ page 94).
Warning! G
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint so that the head re-
straint supports the back of the head at eye
level. This will reduce the potential for injury
to the head and neck in the event of an ac-
cident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.