Filter
Top Products
176
Controls in detail
Loading
Removing and installing the cover
Removing the cover
̈ Open latch 1 on right and left side in
direction of arrow.
̈ Pull cover 2 out upwards.
Installing the cover
̈ Place cover into recesses.
̈ Press right and left sides of cover down
until it locks into place.
Enlarged cargo compartment
The rear seat bench can be folded and low-
ered to increase the cargo compartment.
The left, right or both seat backrests sec-
tions may folded down according to need.
For more information, see “Split rear seat
bench” (
୴ page 176).
Split rear seat bench
1 Lever for seat backrest sections
2 Lever for seat bench sections
The rear seat bench can be folded and low-
ered to enlarge the cargo compartment.
The left, right or both seat backrest sec-
tions may be folded down as required.
Warning! G
Always lock seat backrest in its upright po-
sition when rear seat bench is occupied by
passengers, or cargo is being carried behind
the seat bench.
To help avoid personal injury from smaller
objects flying in the occupant area during a
collision or sudden maneuver, always use
partition net when transporting cargo
(
୴ page 178).