Filter
Top Products
129
Controls in detail
Control system
Selecting display (speed display or out-
side temperature)
̈ Move the selection marker with
the æ or ç button to the
INSTRUMENT CLUSTER
submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
SELECT DISPLAY
.
The selection marker is on the current
setting.
̈ Press æ or ç to select the dis-
play permanently shown in the multi-
function display.
Lighting submenu
Access the
LIGHTING
submenu via the
SET-
TINGS
menu. Use the
LIGHTING
submenu
to change the lamp and lighting settings on
your vehicle. The following functions are
available:
Setting daytime running lamp mode
(USA only)
̈ Move the selection marker with
the æ or ç button to the
LIGHT-
ING
submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
LIGHT CIRCUIT HEADLIGHT MODE
.
The selection marker is on the current
setting.
̈ Press æ or ç to select manual
or daytime running lamp (constant)
mode. This function is not available in
countries where daytime running
lamps are mandatory.
With daytime running lamp mode se-
lected and the exterior lamp switch at
position 0, the following lamps will
come on automatically when the en-
gine is turned on:
ț Parking lamps and low beam head-
lamps
ț License plate lamps
Function Page
Set daytime running lamp mode
(USA only)
129
Set locator lighting 130
Exterior lamps delayed
switch-off
131
Interior lighting delayed
switch-off
132
୴୴