Filter
Top Products
177
Controls in detail
Loading
Folding seat backrest forward
̈ Remove the head restraints
(
୴ page 96).
̈ Pull release lever 1 in direction of ar-
row and fold seat backrest forward un-
til it locks in place.
Folding seat bench forward
̈ Fold seat backrest forward.
̈ Pull release lever 2 in direction of ar-
row and fold seat bench forward to-
gether with the seat backrest.
Returning seat bench and seat back-
rest to sitting position
̈ Fold up seat bench until it locks in
place.
̈ Pull release lever 1 and raise seat
backrest until it locks in place.
̈ Check to ensure the seat is locked by
pushing and pulling on the seat back-
rest.
Warning! G
Failure to assure that seats and seat back-
rest are locked into place could result in an
increased chance of injury in an accident.
Never place hands under seat or near any
moving parts while a seat is being adjusted.
For safety reasons, the rear seat bench
must only be adjusted when the vehicle is
stationary.
Never ride vehicle with the tailgate open.
Deadly carbon monoxide (CO) gases may
enter vehicle interior resulting in uncon-
sciousness and death.
!
Before folding the seat backrest for-
ward and the rear seat bench down, be
sure that all containers in the rear cup
holder are removed.
Warning! G
Failure to assure that seats and seat back-
rests are locked into place could result in an
increased chance of injury in an accident.