Filter
Top Products
134
Controls in detail
Control system
After entering the vehicle, the steering
wheel will move into the position stored in
memory when
ț the driver’s door is closed
ț you put the SmartKey in the starter
switch and
ț press the appropriate stored position
button on the memory switch
(
୴ page 103)
̈ Move the selection marker with
the æ or ç button to the
CONVE-
NIENCE
submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
EASY-ENTRY FEATURE ACTIVATE
.
The selection marker is on the current
setting.
̈ Press æ or ç to change the
easy-entry/exit setting.
The following settings are available for the
easy-entry/exit feature
Warning! G
Make sure no one can become trapped or in-
jured by the moving steering wheel when
the easy-entry/exit feature is in operation
and the driver’s door is being opened or the
SmartKey is removed from the starter
switch.
Do not leave children unattended in the ve-
hicle, or with access to an unlocked vehicle.
Children could open the driver’s door and
unintentionally activate the easy-entry/exit
feature, which could result in an accident
and/or serious personal injury.
i
To cancel steering wheel movement,
do one of the following:
ț Move the steering column stalk
(
୴ page 22)
ț Press the memory switch
(
୴ page 102)
OFF
The easy-entry/exit
feature is deactivat-
ed
STEERING COLUMN
The easy-entry/exit
feature is activated