Filter
Top Products
103
Controls in detail
Memory function
Storing exterior rear view mirror park-
ing position
For easier parking, you can adjust the pas-
senger-side exterior rear view mirror so
that you can see the right rear wheel as
soon as you engage reverse gear R.
For information on activating the parking
position, see “Activating exterior rear view
mirror parking position” (
୴ page 153).
1 Adjustment button
2 Driver’s side mirror
3 Passenger-side mirror
4 Memory button
̈ Stop the vehicle.
̈ Switch ignition on (if not already on).
̈ Press button 3.
The passenger-side exterior rear view
mirror is selected.
̈ Adjust the exterior rear view mirror
with button 1 so that you see the rear
wheel and the curb.
̈ Press memory button 4 on the door.
̈ Within three seconds, press bottom of
adjustment button 1 above the exteri-
or lamp switch.
The parking position is stored if the
mirror does not move.
i
You can store a parking position for the
passenger-side exterior rear view mir-
ror for each SmartKey using the memo-
ry switch.
i
If the mirror does move, repeat the
above steps. After the setting is stored
you can move the mirror again.