Filter
Top Products
Trails 45
Trails
As you travel with the Magellan Triton on and computing your position, the Magellan Triton
automatically drops electronic breadcrumbs to record your travels. These breadcrumbs are temporary
waypoints that are created and stored while you travel. You can set the intervals that they are created
in the Tracks Option function described in this chapter.
The common term for these breadcrumbs is track. You may be familiar with this term from other
navigation devices you’ve used. A trail is taking the current track and saving it into memory. This
trail can be used again like any other saved route.
An important safety feature of a trail is the Backtrack option. Since the Triton is recording your
movement, it can be used to reverse this track and provide navigation information back to your
starting point, following the same path you have just taken.
Tip: Whenever beginning a hike that you might want to use backtrack route with, clear the track
memory (described in this chapter) before beginning the hike.
Trails are displayed on the Map screen as dotted lines.
Creating a Trail
Once you begin traveling with the Magellan Triton, it will begin to store track information. If you
want to save this track to be used again, you need to follow the steps provided here.
1. From the Map screen press MENU.
2. Select Create.
3. Select Trail.
4. Use the keyboard to enter a name for the trail or use the default name supplied.
5. Select the green checkmark to accept and save the trail.
Creating a Trail (Alternate method)
1. From the Map screen press MENU.
2. Select View.
3. Select Tracks.
4. Select Save Track.
5. Use the keyboard to enter a name for the trail or use the default name supplied.
6. Select the green checkmark to accept and save the trail.
Activating a Trail
1. From the Map screen press MENU.
2. Select Go To.
3. Select Trail.
4. Trails are displayed sorted by name. You can change the order that the trails are displayed
or do a search on a trail. (Select the Search field under the Select Trail header. Select the