Magellan 1500 GPS Receiver User Manual


 
Settings 24
View Memory Usage
1. From the Map screen press MENU.
2. Select View.
3. Select Settings.
4. Select Memory.
5. Select View Usage.
6. Press ESC when done.
Clearing Memory
Use caution when clearing memory. This will delete waypoints and routes stored in the receiver and
cannot be undone.
1. From the Map screen press MENU.
2. Select View.
3. Select Settings.
4. Select Memory.
5. Select Clear Memory.
6. Select the green checkmark to confirm.
Restoring Factory Settings
Use this option with caution. You will need to reset any profiles or settings you have previously set.
1. From the Map screen press MENU.
2. Select View.
3. Select Settings.
4. Select Memory.
5. Select Restore Factory Settings.
6. Select the green checkmark to confirm.
Setting Connectivity
You can set the connectivity through the settings option but please note that every time the Triton is
connected to a personal computer or an external power source a menu will appear requesting you to
indicate the connectivity mode for the receiver. This option is used should you want to change how
the Triton is connected after it has been connected to a PC or external power source.
1. From the Map screen press MENU.
2. Select View.
3. Select Settings.