Magellan 1500 GPS Receiver User Manual


 
Navigation Screens 13
Customizing the Data Fields
1. With the data fields displayed, tap on the field you want to change.
2. Select the data that you want to be displayed. (You can do this by either tapping on the field
or use the cursor control to highlight the field in orange and press ENTER.)
3. The Map screen will be displayed with the data field changed to the type selected.
4. The Map screen has two menus associated with it; the Main Menu and an Options Menu.
The Main Menu is used to access the features of the Triton and the Options Menu can be
used to create a waypoint at the cursor position, set a backtrack route or provide local
information for the cursor position (Other functions are also available if you have a route
active or if you are in panning mode.)
Accessing the Main Menu
1. Press MENU while viewing the Map screen. The Main Menu will appear. Press ESC to close
the menu and return to the Map screen.
Accessing the Options Menu
1. Press ENTER while viewing the Map screen. The Options Menu appears. Select the
function desired or press ESC to return to the Map screen.
Map Cursors
There are two cursors that can be displayed on the Map screen.
The arrow cursor displays your present position (or last known position) on the map with the
arrow pointing in the direction you are heading.
The pan cursor (target icon) can be moved to any position on the map by using the cursor
control or by tapping on the screen. A small red dot around the cursor indicates the direction
to your present position. The pan cursor is used for adding waypoints to the map or creating a
go to route from your present position to a spot on the map. If you view local information
while in pan mode, the information displayed will be for the position of the cursor.
Cancelling Pan
1. When you are done panning around the map, press ESC to return the cursor to your present
position.