Filter
Top Products
3. Uncheck Use Traffic Information.
FAQs
Q1- How does the Magellan Maestro choose the frequency on which to receive Traffic data?
A1: This is an automated procedure. When you turn on the system, the Magellan Maestro analyzes the 5
best frequencies stored in its memory. These frequencies are classified in order of signal strength. The
module then tests if Traffic data is available on the first station. If the first station is sending Traffic
y, otherwise it will test the next one until it finds a station
If none of the 5 frequencies can be used, the Magellan Maestro will start scanning the entire FM band. It
he strongest
s
Q2- Why do we have to wait between 2 and 5 minutes before the RDS module starts delivering RDS
data?
A2: This is the average time for the module to test all the possible frequencies on the FM band and
choose the best one in terms of signal level and Traffic data availability/quality.
messages, the module will stay on that frequenc
that delivers Traffic data.
will search for the best five frequencies on which Traffic data is available and will tune in to t
station. These five best frequencies will be saved in memory to be used the next time the system i
powered up.
50