Filter
Top Products
Checking Connection and Final Adjustments
If the power indicator light on the vehicle power adaptor is on, power is being supplied to the Magellan
Maestro. If it is not on, check the cable connection to the vehicle power receptacle. If the light is still not
on, turn the vehicle’s ignition on.
Press the power button (located at the top right side of the Maestro) and hold down for a few seconds.
The Magellan Maestro will power on. Sit in a normal driving position and make any final adjustments to
the swivel mount for optimum viewing. Tighten the adjusting knobs on the swivel mount to hold the
Magellan Maestro firmly in place.
Press the power button again to turn the Magellan Maestro off and turn the ignition switch of the vehicle
to off. The Magellan Maestro is connected and ready for use.
Security
It is recommended that the Magellan Maestro is not left in plain view while unattended to prevent possible
theft.
Please note that the Magellan Maestro is a receiver only and does not transmit GPS location signals.
Neither the receiver nor the vehicle can be tracked using the Magellan Maestro.
5