Filter
Top Products
38
3. To change the window size again or revert back to the original dis-
play, just follow the steps above. (Most dual-window displays use half
the screen for each window by default.) You can also use the Reset Op-
tions command to revert to the factory default.
NOTE:
The units described by this manual are all capable of using this
command. If your unit does not have a Resize Window command on
the Map Page menu, you can update your software by visiting our
web site www.lowrance.com or by contacting customer service.
Choose Viewable Pages
The Choose Viewable Pages command allows you to turn on or turn off
page displays. When a page display is turned off, it will be removed
from the page display rotation that you scroll through when using the
PAGES key.
Choose Viewable Pages selected from System Setup menu.
1. To turn a page display on or off, press MENU|MENU, then use ↑ ↓ to
select
SYSTEM SETUP and press ENT.
2. Use ↑ ↓ to highlight
CHOOSE VIEWABLE PAGES and press ENT. A list of
your unit's pages will appear.
3. Highlight the desired page display and press
ENT, to turn it on
(check) or turn it off (uncheck).
4. Press
EXIT to return to the main page display.