Filter
Top Products
103
Main Menu with Transparency selected.
To adjust Menu Transparency level:
Press
MENU|MENU|↓ to TRANSPARENCY|ENT. The TRANSPARENCY slider bar
appears. Press ↑ or ↓ to move the bar. The lower end of the scale makes
the menus opaque; the upper end is maximum transparency.
Units of Measure
This menu sets the speed and distance (statute or nautical miles, me-
ters), depth (feet, fathoms, or meters), temperature (degrees Fahren-
heit or Celsius), altitude (feet or meters) and heading (true or mag-
netic) units. To change the units:
Press
MENU|MENU|↓ to SYSTEM SETUP|ENT|ENT.
Units of Measure highlighted on main menu (left). Units of Measure
menu (right).
To set Unit of Measure: Use ↑ ↓ to select the desired category and
press
ENT. Use ↑ ↓ to select the desired unit of measure and press ENT.
If you wish, you can now pick another category to change. After the op-
tion is set, press
EXIT repeatedly to return to the page display.