119
A. To navigate to the waypoint, press
ENT. (The Go To Waypoint com-
mand is already highlighted.) The unit will show navigation informa-
tion to the waypoint.
B. To find the waypoint, press → to
FIND ON MAP|ENT. The Map Page
appears with the cursor highlighting the found waypoint.
Waypoint Information screens with the Go To Waypoint command se-
lected (left). Find on Map selected (right).
To clear these menus and return to the previous page, press EXIT re-
peatedly.
5. If you're looking by name, there are two options: A. You can spell
out the name in the top selection box. Press ↑ or ↓ to change the first
letter, then press → to move the cursor to the next letter and repeat
until the name is correct, then press
ENT|ENT. B. Or you can jump
down to the lower selection list by pressing
ENT, then press ↓ or ↑ to
select a waypoint from the list, then press
ENT. The waypoint informa-
tion screen appears.