Filter
Top Products
69
5. Choose the location you want to set as the reference point and press
ENT|ENT. Its position will appear as the reference position on the map.
6. Press ↑ to
DISTANCE|ENT. Press ↑ or ↓ to change the first character,
then press → to the next character and repeat until the distance is cor-
rect. Press
ENT.
7. Press ↓ to
BEARING|ENT. Press ↑ or ↓ to change the first character,
then press → to the next character and repeat until the bearing is cor-
rect. Press
ENT.
8. Press ↓ to
PROJECT|ENT. The waypoint information window appears. .
GO TO will already be highlighted, so press ENT if you want to begin
navigating to the new waypoint. If you do not want to navigate to the
waypoint, use the ← → keys to select one of the following options: Find
on Map, Edit Name, Edit Symbol, Edit Position, Edit Altitude or De-
lete. Press
ENT to select any of the options.
Select a Waypoint
To select a waypoint on the map use the arrow keys to center the cursor
over the waypoint. A black border will appear around the waypoint.
Delete a Waypoint
To delete a waypoint, press
FIND|↓ to MY WAYPOINTS|ENT. Sort your
waypoints by nearest or by name and press
ENT. Select a waypoint from
the waypoint list and press
ENT. Press → to DELETE |ENT|← to YES|ENT.
To return to the main page display, press
EXIT.
Edit a Waypoint
Waypoint Name
To edit a waypoint name, press FIND ↓ to MY WAYPOINTS|ENT. Press
ENT|↓ to desired waypoint name|ENT|→ to EDIT NAME|ENT. Use the ↑
and ↓ keys to select the first character, then press → to move to the
second character and so on. Press
ENT when you are finished. To return
to the main page display, press
EXIT|EXIT.
Waypoint Symbol
To edit waypoint symbol, press FIND|↓ to MY WAYPOINTS|ENT. Press
ENT|↓ to desired waypoint name|ENT|→ to EDIT SYMBOL|ENT. After the
Select Symbol menu appears, use the arrow keys to select the desired
symbol and press
ENT. To return to the main page display, press
EXIT|EXIT.
Waypoint Position
To edit waypoint position, press FIND|↓ to MY WAYPOINTS|ENT. Press
ENT. Use ↓ and ↑ to select a waypoint name|ENT|→ to EDIT POSI-
TION
|ENT.