Filter
Top Products
38
Navigate trail, navigation page (compass rose) views: Driver is east-
bound heading straight toward trail point 5 (left). The bearing arrow
shows the trail point is due east (straight ahead.) Driver (right) has
reached trail point 5 and must turn south to follow the trail. Arrival
alarm goes off and bearing arrow swings around to right (south), to-
ward the next waypoint, trail point 6. The iFINDER now shows naviga-
tion information to point 6, which is 2.07 miles away.
3. When you reach your destination, be sure to cancel your navigation:
press
MENU|↓ to CANCEL NAVIGATION|ENT. A prompt will appear re-
questing confirmation. Press ←
|ENT.
Clearing or Erasing a Trail
You can erase the current trail and automatically begin recording a
new one by using the Clear Trail command.
WARNING:
Clearing a trail will erase the trail from the iFINDER's
memory. You will not be able to back track the trail, if it
is erased. If you need to preserve the trail, switch to Ad-
vanced Mode and use the instructions in Sec. 4 for Creat-
ing and Saving a Trail.
1. Press
MENU|↓ to CLEAR TRAIL|ENT. A prompt will appear requesting
confirmation. Press ←|
ENT. 2. Press EXIT to return to the main page
display.
Power Saving
One of the biggest drains on the iFINDER's battery is the position up-
date rate – that is, how often the iFINDER checks its location from the
GPS signal. The iFINDER can be set to update less often, which will
diminish position accuracy, but extend battery life.
Trail
waypoint
symbol
Compass
rose
Bearing
arrow
Trail line
Present position
Cross track
error range
(off course
indicator)
Track or compass heading indicator