Filter
Top Products
36
Safety Mode disable menu.
Choose whether you want Safety Mode on or off by selecting the appro-
priate label, and press
ENT.
WARNING:
When a GPS unit is used in a vehicle, the vehicle operator
is solely responsible for operating the vehicle in a safe
manner. Vehicle operators must maintain full surveillance
of all pertinent driving conditions at all times. An accident
or collision resulting in damage to property, personal in-
jury or death could occur if the operator of a GPS-
equipped vehicle fails to pay full attention to travel condi-
tions and vehicle operation while the vehicle is in motion.
Do not attempt to configure, adjust or enter information
into your GPS unit while driving.
Satellites
This command provides detailed information on the status of the
iWAY's satellite lock-on and position acquisition. On the map display a
flashing current position indicator/question mark symbol and flashing
GPS data displays indicate that satellite lock has been lost and there is
no position confirmed. This command shows you the quality and accu-
racy of the current satellite lock-on and position calculation.
WARNING:
Do not begin navigating with this unit until the numbers have
stopped flashing!
To get to the Satellite Status screen from the Main Menu, choose
SATELLITES.