Filter
Top Products
20
Whenever you have a waypoint selected, you can press the
FIND key and
choose
SELECTED ITEM to access more information about it. A Waypoint In-
formation Screen will appear, which includes detailed information about
the waypoint as well as options to begin navigating to the waypoint (
GO
TO), to show it on the map, to edit its name and symbol, or to delete it
from memory. Use ← or → to cycle among the available options.
Editing a Saved Waypoint
You can edit a waypoint's name or symbol by selecting it on the map
and accessing the Waypoint Information Screen as described earlier.
Use the arrow keys to choose which aspect of the waypoint you want to
edit, and press
ENT.
Deleting a Saved Waypoint
You can remove a waypoint from the iWAY by selecting it on the map
and accessing the Waypoint Information Screen as described earlier.
Use the arrow keys to choose
DELETE, and press ENT. Confirm that you
wish to delete the selected waypoint, and it will disappear.
Navigating to a Saved Waypoint
The easiest way to navigate to a saved waypoint is to treat it like any
other cursor position on the map. Use the zoom and arrow keys to select
the waypoint with your cursor. Then simply press
ENT to auto-route to
the selected location.
If you have several waypoints stored on your iWAY, or don't want to
take the time to pan over to one, you can also use the Find Waypoint
command from the Find Menu. This method allows you to sort through
all of the waypoints on the unit either by name or by nearest to your
current location. For more details on using the Find Menu, see Sec. 4
beginning on page 45.
The following page contains a 9-step "Practice Run" that will walk you
through the most basic iWAY operations. Using just the steps outlined
here, you can operate your iWAY well enough to find your current loca-
tion and find your way to a destination.
If you don't want to carry the manual with you as you practice with the
iWAY, you might consider photocopying this practice run page and
tucking it into your pocket.