Kenwood DNX570TR GPS Receiver User Manual


 
88
Return to the Top page
Basic Operations
DNX690HD/DNX570HD/DNX570TR/DNX5700BT/DNX5080EX
4
3
1
2
5
6
9
7
8
NOTE
•The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason,
they may be different from the actual panels.
•In this manual, each model name is abbreviated as follows.
DNX690HD:
DNX570HD, DNX570TR, DNX5080EX, and DNX5700BT:
If above icons are showed, read the article applicable to the unit you use.
How to insert a microSD Card
1) Open the
9
microSD card slot cover
as the illustration in the right.
2) Hold the microSD card with the label
facing up and the notched section right,
and insert it into the slot until it clicks.
To eject the card:
Push the card until it clicks and then remove your
finger from the card.
The card pops up so that you can pull it out with
your fingers.