Kenwood DNX570TR GPS Receiver User Manual


 
107
Return to the Top page
Setting Up
AV Output Interface Setup
YoucanselectanAVsourcetobeoutputat
theAVOUTPUTport.Defaultis“VIDEO1”.
1
Touch [Menu] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [AV-OUT].
AV-OUT Interface screen appears.
4
Touch [2] or [3] to set [AV-OUT] to
VIDEO, DISC, iPod, Navigaton, or OFF.
External Device Control
Controltheexternaldevicepowersupply.
1
Touch [EXT SW] in the Source Control
screen.
EXT SW Control screen appears.
NOTE
•If [EXT SW] is not displayed, touch [ ].
2
Touch the desired switch key.
You can turn on or off the external device
power supply.
NOTE
•You must connect a commercially available relay
unit in order to use this function. Connect the
external device to be controlled to that relay unit.
•See EXT SW setup (P.98) for information on
setting the power on or off specification.