Kenwood DNX570TR GPS Receiver User Manual


 
83
Return to the Top page
Bluetooth Operation
Registering the Bluetooth Unit
1
Touch [Search].
Searched Device List screen appears.
NOTE
•A new device cannot be registered if there are 5
registered Bluetooth units. Delete unnecessary
registration. See Connecting the Bluetooth unit
(P.84).
•The Searched Device List screen cannot be
displayed, when the receiving source is PANDORA
internet radio, aha, iHeartRadio, or Bluetooth
Audio.
•This unit is compatible with the Apple Easy
Pairing function. When an iPod touch or iPhone
is connected to this unit using Dock Connector
to USB Cable, an authentication dialog appears.
Performing operation for authentication on this
unit or iOS smartphone registers the smartphone
as a Bluetooth device.
2
Touch [PIN Code Set].
PIN Code Set screen appears.
NOTE
•If the unit cannot be searched in step 1, you can
search the unit again by touching [Search] in
above screen.
•A Bluetooth device cannot be searched while the
source is Pandora, aha, iHeartRadio, or Bluetooth
audio.
•Touch [Cancel] to cancel searching for the
Bluetooth unit.
3
Enter PIN code and touch [Enter].
The entered code is recognized and
Searched Device List screen appears again.
4
Select the Bluetooth unit to register
from the list.
The Bluetooth SETUP screen appears.