Kenwood DNX570TR GPS Receiver User Manual


 
100100
Return to the Top page
Setting Up
Monitor angle control
Youcanadjustthepositionofthemonitor.
1
Touch [Angle] in the Display Menu
screen.
Angle setup screen appears.
2
Select a below number that represents
your desired angle setting.
Default is “0”.
NOTE
•You can store the current monitor angle as the
angle during power off. Touch [Memory] when
the desired angle is selected.
Panel color coordinate
Youcansetthescreenandbutton
illuminationcolor.
Theselectableitemsdifferdependingonthe
unit.
1
Touch [Color] in the Display Menu
screen.
Color screen appears.
2
Touch [SET] of [Panel Color Coordinate].
Panel Color Coordinate screen appears.
NOTE
•You can touch [SET] or [Initialize] when
[Panel Color Scan] is set to off.
•Touch [Initialize] to reset the settings to the
default settings.
3
Touch the desired color.