Kenwood DNX570TR GPS Receiver User Manual


 
147
Return to the Top page
Controlling Audio
Zone Control
Youcanselectdifferentsourcesforboth
frontandrearpositionsinthevehicle.
1
Touch [Zone Control].
Zone Control screen appears.
2
Touch [Dual Zone].
3
Set each source as follows.
[D] (Front Source, Rear Source)
Select the audio source for each.
[S], [R] (Rear VOL.)
Adjust the rear channel volume.
[Single Zone]
Touch to turn off the dual zone function.
NOTE
•When the rear speaker sound is switched, the
audio source that is output at the AV OUTPUT
terminal is also switched to the same source.
•When the dual zone function is set to on, the
following functions are not available.
–Output from the subwoofer
–Subwoofer Level/Bass Boost (P.142)
–Equalizer Control/Sound Effect/Listening
Position (P.143, 145, 148)
–DSP Bypass Control/Speaker Setup/Car Type
Setup (P.141, 139, 140)