Kenwood DNX570TR GPS Receiver User Manual


 
3232
Return to the Top page
CD, Disc, iPod, USB device
Music/Video/Picture Basic Operation
Mostfunctionscanbecontrolledfromthesourcecontrolscreenandplaybackscreen.
NOTE
•Set the remote controller mode switch to AUD mode before starting operation, see Switching the operation
mode (P.121).
•To connect iPod to this unit, optional accessory KCA-iP202 or KCA-iP102 is necessary.
When iPod is connected using the KCA-iP202, you can listen to audio and watch video. When iPod is connected
using the KCA-iP102, you can only listen to audio.
When using the KCA-iP202 to connect your iPod, set “iPod AV Interface Use” or "AV-IN2 Interface" to “iPod”, in
AV
Input Setup (P.106), or to “AV-IN2” when using KCA-iP102.
Seethefollowingsectionsforeachsourceoperation.
• Music CD (P.32)
• Disc media (P.32)
• USB device (P.34)
• iPod (P.34)
Music CD and disc media
NOTE
•In this manual, “Music CD” will be referred to as the general CDs which include music tracks in.
“Disc media” will be referred to as CD/DVD disc which includes audio, picture or video files.
•The screen shot below is for CD. It may be different from the one for disc media.
2
3
3
4
4
5
8
6
2
7
Simple Control screen List Control screen
1
1 Information display
Displays the following information.
•Track #: Each time you touch this area, display switches between current track number, text, etc.
•3, ¡, ¢, 7, etc.: Current play mode display
The meanings of each icon are as follows; 3 (play), ¡ (fast forward), 1 (fast
backward), ¢ (search up), 4 (search down), 7 (stop),
R
(resume stop), 8
(pause).
2 Movie display area/Control switching area
Touch to switch between the Simple Control and List Control screen.
CD/Audio and Visual Files/iPod Operation