Kenwood DNX570TR GPS Receiver User Manual


 
11
Return to the Top page
Basic Operations
Initial setup
Performthissetupwhenyouusethisunitfirsttimeorwhenyouresettheunit(P.127).
Set each item as follows.
Language
Select the language used for the control screen and setting items. Default is “American English (en)”.
1 Touch [SET].
2 Touch [2] or [3] to select the desired language.
3 Touch [Enter].
For detailed operation, see Language setup (P.97).
Angle
Adjust the position of the monitor. Default is “0”.
1 Touch [SET].
2 Touch desired angle number and [
].
For detailed operation, see Monitor angle control (P.100).
iPod AV Interface Use
(DNX570HD, DNX5080EX, DNX5700BT)
Set the terminal which your iPod is connected to. Default is “iPod”.
1 Touch [iPod] or [AV-IN2].
AV-IN SETUP (DNX570TR)
Select the source connected to AV-IN.
1 Touch [SET].
2 For AV-IN Interface, touch [Rear Camera] or [AV-IN] to select the source.
3 For AV-IN Name, touch [2] or [3] to select the name.
Select the source connected to AV-IN2.
1 Touch [SET].
2 For AV-IN2 Interface, touch [iPod] or [AV-IN2] to select the source.
3 For AV-IN2 Name, touch [2] or [3] to select the name.
For detailed operation, see AV Input Setup (P.106).
1
Continued