Kenwood DNX570TR GPS Receiver User Manual


  Open as PDF
of 143
 
104104
Return to the Top page
Setting Up
Camera Setup
Youcansetcameraparameters.
1
Touch [Menu] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Camera].
Camera SETUP screen appears.
4
Set each item as follows.
Rear Camera*
1
Selects the type of rear camera to use.
CMOS-3xx: When the CMOS-300 series with ID
1 set is connected.
Other (Default): When the other camera is
connected.
R-CAM Interruption
Sets a method for switching the display.
Setting values are ON and OFF.*
ON: Switches to the rear view camera video
display when shifting to reverse or
pressing the <AUD>
or
<SCRN>
button for 1
second.
OFF (Default): Switches to the rear view
camera video display when
pressing the <AUD>
or <TEL>*
button for 1 second.
R-CAM Settings*
2
Adjusts the CMOS-300 series with ID 1 set.
For details, see the instruction manual of your
camera.
Front Camera*
1
Selects the type of front camera to use.
CMOS-3xx: When the CMOS-300 series with ID
2 set is connected.
Other: When the other camera is connected.
OFF (Default): When the front camera is not
used.
F-CAM Settings*
3
Adjusts the CMOS-300 series with ID 2 set.
For details, see the instruction manual of your
camera.
*1Thesesettingsbecomesettableonlywhen
theparkingbrakeison.
*2Thissettingbecomessettableonlywhen
theparkingbrakeisonandtheCMOS-300
seriesisselected.
*3Thissettingbecomessettableonly
whentheparkingbrakeisonand“Front
Camera”issetto[ON].
*4[TELKeyLongerthan1Second]mustbe
setto“R-CAM”.SeeUser interface (P.96)
*5
ForDNX570TR,whenthevideoisswitched
totherearviewcameratheaudioisalso
switchedtotherearviewcamera.
 previous next