Filter
Top Products
23
Chapter 5 SYSTEM MENU
Press “ ” in any page to select Main Menu as Fig.5-1-1 (for GM-305-DT, GM-305-HT only) and
press “ ”. There are Waypoints, Routes, Track Logs, Pw Savings On/Off and UpLoad
and DownpLoad for options as Fig. 5-1-2.
I. WAYPOINTS
Explorer can hold up to 500 waypoints.
Fig. 5-1-1 Fig. 5-1-2 Fig. 5-1-3
Select Waypoints and press ” ”. You may see name, distance, waypoints and a set of figures,
2/2/500 at the bottom as Fig.5-1-3. The first digit is the number of waypoints meeting the disply
criteria. The second one is the sum of waypoints which you have created in the unit. The last one
is the maximum of waypoints which may be used in the system.
A. Criteria
The name and distance are the criteria to show waypoints in the column. To change the
criteria do as follows:
(i) Name
(a) Move the marked field to Name and press “
” to enter up to 8 characters, numbers
or symbols. The data of waypoints in the column will change accordingly. “-“ means
ignoring all criteria and all waypoints will show.
e.g. --------: shows all waypoints,
W ----: shows the waypoints with W initial, and
---s----: shows the waypoints with s in the fourth column and ignoring
other columns.
(b) Press direction keys “
” or “ “ to change data, “ ” or ” ” to change column. Press
“ ” setup is complete.
(ii) Distance
(a) Move the marked field to Distance and press “
” to enter a larger “>”/smaller ‘<”
mark followed by any digit within 9,999,999m. The data in the column will change
accordingly.