Filter
Top Products
22
A. Time Adjustment
(i) Prior to changing the time, make sure of the actual difference between the time stored in
the Explorer and your local time. You only need to change the hours. The date and
minutes can’t be changed.
(ii) Select Change Time and press “
” as Fig. 4-3-3.
(iii) Move the marked field to Minus/Plus and press “
” as Fig.4-3-4, 4-3-5.
(iv) Move the marked field to Hour and press “ ”.
(v) Press direction keys, “ ” or ” ” to mark one of the two figures.
(vi) Press direction keys, “ ” or “ “ to adjust time and press “ ”.
(vii) Move marked field to “ˇ” and press “ ”.
(viii) Let the Explorer position fixed to get correct time. If the Explorer is position
fixed within one month, the Explorer should already show the correct time.
B. Main Menu
Please refer to page 23 as Fig. 5-1-1.
IV. COMPASS PAGE
Your moving direction is displayed in this page as well as the name, distance and time to
next waypoint and destination respectively as Fig. 3-3-8 in gage 14.
Time to destination = (distance) / (average speed)
The moving direction is as “ “ pointing at the top outside the compass. There will be an
arrow ”Д in the compass pointing to the direction to next waypoint while route navigation
function on. Please refer to page 25 to create routes.
Press “ ” to go to Main Menu. Please refer to page 22 as Fig. 5-1-1.
Fig.4-3-4
Fig.4-3-2 Fig.4-3-3 Fig.4-3-1