Filter
Top Products
35
To change the Map Datum:
1. Press the PAGE Button and switch to the ‘MENU’
Page. Press the UP or DOWN Button and highlight
‘SETUP’. Press ENTER. Use the UP or DOWN
Buttons to select ‘UNITS’. Press ENTER. The ‘UNITS’
Page appears.
2. Press the UP or DOWN Button and select the ‘MAP
DATUMS’ fi eld. Press ENTER.
3. Press the UP or DOWN Button to select the desired
datum. Press ENTER. Press PAGE to select the page
of your choice.
Units of Measure
The eTrex lets you select statute (the default setting),
nautical, or metric units of measure for all speed and
distance readouts.
To change the Units of Measure:
1. Press the PAGE Button and switch to the ‘MENU’
Page. Use the UP and DOWN Button and highlight
the ‘SETUP’ fi eld. Press ENTER. The ‘SETUP’ Page
appears.
2. Press the UP or DOWN Button to select ‘UNITS’.
Press ENTER. The ‘UNITS’ Page appears.
3. Press the UP or DOWN Button and select the
‘UNITS’ fi eld. Press ENTER.
4. Press the UP or DOWN Button to select the desired
unit. Press ENTER. Press PAGE to select the page
of your choice.
You can select statute,
nautical, or metric units
of measurement from
the ‘UNITS’ page.
The ‘DEFAULTS’
setting will reset the
eTrex units to all of its
factory settings.
Reference
Units of
Measure
etrex manual.indd 10/12/00, 11:17 AM35