Filter
Top Products
19
You will notice on the Map Page the little grey “man”.
The man stands still when you are not moving, he moves
when you move, and a blinking “?” means the eTrex has
lost satellite reception (weak signals). You should relocate
the eTrex or move to a place that has a clear view of
the sky.
Pointer Page Options
In addition to the Pointer Page basics that were
covered on page 12, the following Pointer Page options
are available:
• Reset Max Speed: this resets the Maximum Speed
achieved during a trip.
• Reset Trip: the trip time, trip distance (odometer) and
average speed are reset to zeros.
• Stop Navigation: stops any active navigation.
To select a Pointer Page option:
1. Press the ENTER Button on the ‘POINTER’ Page.
2. The Options Menu appears. Press the UP or DOWN
Button, highlight the desired option, and press
ENTER. Once you press ENTER, the change is
made and the Options Menu disappears.
You can also change the fi elds at the bottom of the
Pointer Page to display different data:
Speed—like the speedometer in your car, ‘SPEED’ tells
you how fast you are going regardless of whether or not
you are on the right track.
Average Speed—the average speed traveled since last trip
reset.
Max Speed—the maximum speed traveled since last
reset.
Heading—the direction you are traveling.
The Pointer Page allows
you to display eleven
types of different data,
such as ‘Elevation’.
The eTrex will tell you
the time of sunrise
and sunset at your
current location.
Reference
Pointer Page
Options
etrex manual.indd 10/12/00, 11:16 AM19