Filter
Top Products
8
Standard Accessories
Lanyard........................................Part No. 013-00052-00
Attaches to a slot on the bottom of the unit for convenient carrying.
Owner’s Manual............................Part No. 190-00205-00
Quick Start Guide ........................Part No. 190-00205-01
Optional Accessories
Carrying Case...............................Part No. 010-10266-00
Protects the eTrex when not in use.
Auto Power Adapter.....................Part No. 010-10203-00
Provides eTrex operation from a automobile cigarette lighter.
PC Data Cable..............................Part No. 010-10206-00
Allows for transfer of data from a PC to an eTrex.
Data Cable....................................Part No. 010-10205-00
Wiring harness. Connections for data input/output.
Bicycle Mounting Kit....................Part No. 010-10267-00
Allows the eTrex to be mounted on bicycle handle bars.
PC Cable/Auto Power Adapter......Part No. 190-10268-00
Allows transfer of waypoints and routes from a PC to the eTrex and provides
unit operation from an automobile cigarette lighter.
MapSource® Map Data CD-ROMs
An excellent tool for creating waypoints and routes on your PC using a
background map and downloading them to your eTrex. See your GARMIN
dealer for MapSource details.
Installing the Batteries
The eTrex operates on two AA batteries (not
included), which are installed at the back of the unit.
To install the batteries, remove the battery cover by
turning the D-ring at the back of the unit 1/4 turn
counter-clockwise. Insert the batteries observing proper
polarity. Attach the battery cover by turning the D-ring
1/4 turn clockwise. Two AA alkaline batteries should last
about 22 hours in battery save mode.
Auto Power Adapter -
Converts 12VDC output
from the lighter to 3VDC
input to the eTrex. Not
interchangeable with
power adapters for
GARMIN VHF 720,
725, and 725e, or GPS
170, 175, 190, and 195.
PC Interface Cable with
Auto Power Adapter
Bicycle Mounting Kit
Introduction
Accessories
etrex manual.indd 10/12/00, 11:16 AM8