Filter
Top Products
33
Display Page
The Display Page allows you to set the display
backlight timeout (on all the time, 15 or 30 seconds, and
1 or 2 minutes) and the display contrast.
To change the Light Timeout:
1. Press the PAGE Button and switch to the ‘MENU’
Page. Press the UP or DOWN Button and highlight
‘SETUP’. Press ENTER. The ‘SETUP’ Page appears.
2. Press the UP or DOWN Button and highlight
‘DISPLAY’ and press ENTER. Press ENTER on the
‘LIGHT TIMEOUT’ fi eld.
3. Press the UP or DOWN Button and highli-ght your
selection and press ENTER. Press PAGE to get back
to the ‘SETUP’ page.
To adjust the display contrast:
1. Press the PAGE Button and switch to the ‘MENU’
Page. Press the UP or DOWN Button and highlight
‘SETUP’. Press ENTER. The ‘SETUP’ Page appears.
2. Press the UP or DOWN Button and highlight
‘DISPLAY’ and press ENTER. Press the UP or
DOWN Button and highlight the ‘CONTRAST’ icon
and press ENTER.
3. Press the UP or DOWN Button and adjust the
contrast and ENTER. Press PAGE to get back to the
‘SETUP’ page.
Units Page
Using your eTrex with a paper map increases the
navigation power of both. If you are going to use a map in
conjunction with the eTrex, you must select the position
format (grid), map datum, map units, and north reference
to match the map’s units. This is the purpose of the
Units Page. Regarding position format, the eTrex allows
you to choose from eighteen different grids. The eTrex
supports the UTM/UPS and latitude/longitude grids
because together they cover the world.
You can set the backlight
to stay on all the time,
but watch your battery
power!
The ‘UNITS’ Page
allows you match the
units of the eTrex to the
units of a unique paper
map you may be using.
Reference
Display and
Units Pages
etrex manual.indd 10/12/00, 11:17 AM33