Filter
Top Products
32 iQue
®
M3 Operating Instructions
GETTING CONNECTED > CONNECTING TO THE INTERNET FROM A MODEM
CHAPTER 5: GETTING CONNECTED
You can use your iQue M3 to exchange information with the Internet, with a network, or with other mobile devices. You have the
following connection options:
• Connect to the Internet through your Internet service provider (ISP). Once connected, you can send and receive e-mail
messages by using Messaging and view Web or WAP pages by using Microsoft
®
Pocket Internet Explorer. See “Connecting
to the Internet from a Modem” below.
• Connect to the network at your company or organization where you work. Once connected, you can send and receive e-mail
messages by using Messaging, view Web or WAP by using Pocket Internet Explorer, and synchronize with your desktop
computer. See “Connecting to a Network” on
page 36.
• Connect using Infrared (IR) to any other device that uses these technologies. See
page 39.
For information on how to connect and exchange information with your desktop computer, see Chapter 2, beginning on
page 9.
You can determine the status of your connection from the connectivity icons, which appear in the notification area. Note that some
of these icons are animated.
Status Icon Meaning
Connected
or
Transferring Data
Not Connected
Synchronizing
Zero–Configuration Internet (The Internet connection has not been configured yet.)
Connecting to the Internet from a Modem
To set up a modem connection to your ISP, you need the following information:
• ISP dial-up access telephone number.
• User name. Some ISPs require information in front of the user name, such as “MSN/username.”
• Password.
• TCP/IP settings.