Filter
Top Products
3-6
Waypoint View/Action
Name Selection
(POSN, REN, DEL)
Latitude
Longitude
WAYPOINT DEFINITION PAGE
The Waypoint Definition Page may be displayed by pressing the WPT key.
It allows you to review, create, modify, delete, and rename waypoints.
To create, modify, or review a waypoint
· With the cursor under the waypoint name field, enter the desired
waypoint name. (Press the MORE key until “POSN” is displayed if it
is not already displayed under the view/action field.)
· To create or modify position, enter the waypoint latitude and longitude
as described in Section 3.3. (NOTE: If a waypoint is being used for
navigation, its position cannot be modified. An attempt to modify the
position of such a waypoint will result in the message “ACTV WPT”.)
To rename a waypoint...
· With the cursor under the waypoint name field, enter the name of the
waypoint to be renamed.
· Press MORE until “REN?” is displayed.
· Press ENT, the following page will be displayed.
Old New
Waypoint Waypoint
Name Name
· Enter the new waypoint name.
To delete a waypoint from memory...
· With the cursor under the waypoint name field, enter the name of the
waypoint to be deleted.
· Press MORE until “DEL?” is displayed.