Garmin 101 GPS Receiver User Manual


 
43
Main Menu Pages
To set the expired action:
1. Press the PAGE button until the Main Menu Page is displayed.
2. Use the
UP and DOWN buttons to highlight ‘SETUP’ and press ENTER.
3. Use the
UP and DOWN buttons to highlight ‘SET TIMER’ and press ENTER.
4. Use the UP and DOWN buttons to highlight the field below ‘STOP’ and press ENTER.
5. Use the UP and DOWN buttons to highlight ‘STOP’ and press ENTER to have the timer
stop after it reaches 0:00. Select ‘COUNT UP’ and press ENTER to have the timer start
counting up when it reaches 0:00.
Expired and Interval Timer Tones
You can set the expired and interval tones to different tones. The interval tone sounds at
each minute and then during the last 10 seconds.
To set the Expired and Interval Tones:
1. Press the PAGE button until the Main Menu Page is displayed.
2. Use the
UP and DOWN buttons to highlight ‘SETUP’ and press ENTER.
3. Use the
UP and DOWN buttons to highlight ‘SET TIMER’ and press ENTER.
4. Use the UP and DOWN buttons to highlight the field below ‘EXPIRED TONE’ or
‘INTERVAL TONE’ and press ENTER.
5. Use the UP and DOWN buttons to highlight the desired tone from the list. Press
ENTER.
The selected Expired Tone will sound at the expiration of the timer. The selected Inter-
val Tone will sound at minute intervals and during the final ten seconds of the timer.
Setup Menu: Set Timer
Setting the expired action
Set Timer Page
scrolled to bottom
Selecting the Interval Tone