Garmin 101 GPS Receiver User Manual


 
15
Main Pages
Timer Page
Timer Page:
Timer running
Set Timer Page:
Show Timer
Displaying the Timer Page
By default, the Timer Page is not displayed. You must access the Main Menu and enable
the Timer Page before you can display and use it.
To enable the Timer Page:
1. Press the PAGE button until the Main Menu Page is displayed.
2. Use the
UP and DOWN buttons to highlight ‘SETUP’ and press ENTER.
3. Use the
UP and DOWN buttons to highlight ‘SET TIMER’ and press ENTER.
4. Use the UP and DOWN buttons to highlight the field below ‘SHOW TIMER PAGE’ and
press ENTER.
5. Use the UP and DOWN buttons to highlight ‘YES’ and press ENTER.
6. Press the PAGE button to exit the menu pages.
Setting the Timer
Before you can use the timer, you must set the timer to count down from a particular
number, such as 10 minutes. You can also program what the timer will do when the time
has expired and what tones will sound at the timer’s expiration and intervals. This section
will simply explain how to set the timer to count down. For more information about setting
up the timer, refer to the “Setup Menu: Set Timer” section of this guide.