Filter
Top Products
User Waypoint Information
In addition to the airport, VOR, NDB and intersection waypoints contained in your
NavData® card, the GNC 250XL allows you to store up to 1,000 user-defined way-
points. Once a user waypoint is created, two user waypoint pages will display the fol-
lowing information:
• Waypoint identifier
• Position in latitude and longitude
• Identifier, range and bearing from a reference waypoint
• User comments
To scroll between the user waypoint position page and the user comments page,
rotate
O
. User waypoints may be created or modified using the
W
key. After select-
ing the waypoint identifier, as shown on page 39, you will be prompted to enter infor-
mation if the waypoint is new. There are three ways to create a user waypoint’s posi-
tion from the
W
key:
1. Enter the exact position of the new waypoint.
2. Reference a known waypoint by range and bearing.
3. Enter a range and bearing from your current position.
To create or edit a user waypoint:
1. Press
W
.
2. Press
C
twice and use
O
to highlight the ‘user?’ field. Press
E
.
3. Use
K
and
O
to enter the waypoint identifier. Press
E
.
48
User waypoint comments page
User waypoint page
SECTION
3
WPT KEY
User Waypoints
250xl manual 2 7/17/98 1:27 PM Page 48