Filter
Top Products
To auto-tune from the nearest airport page,
press E.
SECTION
2
COMM FEATURES
Overview
Auto-Tuning
To select a frequency from a list, highlight the
desired frequency and press E.
During the course of navigating with the GNC 250XL, there may be times when
you need to quickly select a comm frequency while you are entering data in the GPS
window. Whenever data entry in the GPS window is interrupted by activating the
standby frequency field, the GPS field in use will become ‘splatted’, or blocked out.
Once the standby frequency has been entered, you may return to data entry by
pressing the
C
key. The cursor will return to the active GPS field at the point
where data entry was interrupted.
The GNC 250XL’s auto-tune feature allows you to quickly select any database
frequency in the GPS window as your standby frequency.
To auto-tune a single frequency displayed in the GPS window:
1. Press
E
with the cursor inactive.
2. To make the standby frequency the active frequency, press
@
.
34
250xl manual 2 7/17/98 1:27 PM Page 34