Filter
Top Products
The GNC 250XL features five airport pages:
airport identification— allows entry of desired airport by identifier,
facility name or city; displays region and/or country of facility.
airport position— allows entry of desired airport by identifier; displays
latitude, longitude and elevation; indicates usage and fuel availability;
displays available approaches and airport control/radar capability.
airport communication— allows entry of desired airport by identifier;
displays radio frequencies/usage, and sector and altitude restrictions.
airport runway— allows entry of desired airport by identifier; indicates
runway designations, length, surface and lighting information; displays
ILS/localizer and/or pilot-controlled lighting frequencies.
airport comments— allows entry of desired airport by identifier; displays
user comments for the selected airport.
The airport identification page displays a selected airport’s identifier, region and
country, city/state and facility name. The identification page is always the first airport
page available, allowing you to quickly review an airport facility or select another
facility by entering the identifier, facility name or city of the desired airport.
41
Airport runway page. The down arrow next to
the identifier indicates additional runways may be
displayed by rotating the K knob.
Airport communication page. The down arrow
next to the identifier indicates additional frequen-
cies may be displayed by rotating the K knob.
SECTION
3
WPT KEY
Airport Pages
Waypoint Type
and Identifier
Region/Country
Location
(city/state)
Facility Name
{
250xl manual 2 7/17/98 1:27 PM Page 41