Furuno MFDBB GPS Receiver User Manual


 
23-24
Standard mode
Probability mode
Network integration with NavNet 3D
** Manual gain control and mode selection can only be done by the FCV-1150.
Via Ethernet interface, the FCV-1150 brings professioal sh nding technologies onto the
NavNet 3D network. This advanced conguration enables you to install the FCV-1150
anywhere onboard within reach of a LAN cable. Auto range, auto gain, shift and zoom
controls can be performed from both NavNet 3D and the FCV-1150**.
12.1" COLOR LCD SOUNDER
FCV-1150
Bottom Discrimination Display
The BBDS1 is the latest addition to the product line-up of
network sh nders, which enables NavNet 3D to display
seabed bottom discrimination.
FISH FINDER
NavNet 3D Network Fish Finder
FURUNO DFF1 and DFF3 and new BBDS1 can turn any display into
a powerful, dual frequency digital fish finder. Connect directly to a
Multi-Function Display, Black Box or to an Ethernet hub with a single
Ethernet cable. The DFF1 and new BBDS1 have 600 W or 1 kW output
power, while DFF3 has 1/2/3 kW output power. Both support a variety
of transducer options.
Enhanced detection of fish targets by FURUNO Digital Filter
(FDF
TM
) Fish Finder technology
Selectable display modes include High or Low Frequency,
Dual Frequency, Zoom, Nav Data, A-Scope, Marker Zoom,
Bottom Zoom or Bottom-Lock
New Bottom Discrimination Display mode available (BBDS1)
FURUNO Free Synthesizer (FFS) transceiver to let you
choose any two operating frequencies from 28 to 200 kHz
(DFF3)
Audio and visual alarms alert you whenever preset limits are
met for water depth, water temperature and fish echoes
Two selectable automatic gain control modes: Cruising and
Fishing
IP address is automatically assigned for true Plug and Play
BBDS1
For detailed information, please refer to page 14.