Filter
Top Products
Ethernet
NMEA0183
Contact
Stereo
CAN bus*
External alarm output & point/
MOB alert input
Variable line level/
stereo output
MOB Pendant System Ready
Any NN3D system is compatible with every Wireless MOB
Pendant System through the MOB Contact Closure Input.
All the NavNet 3D radar sensors
incorporate a CAN bus port to which
certain CAN bus/NMEA2000 sensors
can be directly connected. Power for
these networked sensors is supplied
directly from the radar itself. This unique
feature allows for exible installation of
multiple CAN bus/NMEA2000 sensors
without the need to run cables all the
way to the main processor unit. CAN
bus/NMEA2000 data is converted and
distributed throughout the NavNet 3D
Ethernet network.
RADAR FISH FINDER
GPS
GPS
GPS
Network Fish Finder
DFF1/DFF3
BBDS1
Color LCD Sounder
FCV-1150
GPS/WAAS Antenna
GP-330B
GPS/WAAS Antenna
GP-320B
GPS Navigator
GP-33
ARPA Radar
FAR-2xx7 Series
Radar Sensors
NavNet 3D Network: Building Block Solution
NavNet 3D is built on an Ethernet network, allowing you to add as few or as many components
as you desire along with up to ten displays to create your perfect navigational suite. Further,
you can connect NMEA0183 and CAN bus devices to any display or BB processor and share
that information across the Ethernet network automatically. User setting data can also be
transferred by using SD cards for synchronization of operation settings amongst networked
displays. Power on/off synchronization amongst all of the NavNet 3D display units can be
FURUNO ARPA/RADAR Series FAR-2xx7
can be connected to NavNet 3D through the
Ethernet data link.
15-16