Filter
Top Products
9. INSTALLATION
9-7
Terminator
• When connecting to backbone cable
Attach the following terminators to both ends of the backbone cable.
When connecting to the optional junction box FI-5002
There are two terminal resistors (R1 and R2) inside the FI-5002.
• No backbone cable is connected: Set both R1 and R2 to “ON”.
• Backbone cable is connected: Set a resister to “ON”.
• Two backbone cables are connected: Set both R1 and R2 to “OFF”.
Name Type Code No. Remarks
Terminator (male) LTWMN-05AMMT-SL8001 000-160-508-10 Mini connector
Terminator (female) LTWMN-05AFFT-SL8001 000-160-509-10 Mini connector
Terminator (male) LTWMC-05BMMT-SL8001 000-168-604-10 Micro connector
Terminator (female) LTWMC-05BFFT-SL8001 000-168-605-10 Micro connector
GP-33
Backbone cable
MFD-BB/8/12
Terminator
Terminator
CN1
CN3 CN4 CN5 CN2
R2
R1
CN3 CN4 CN5
CN2
CN2
:
OFF
:
ON
Setting position